Xact air locations5/15/2023 ![]() ![]() Places that sell gasoline now do not have lube bays and have no need for air compressors. Service work is done at quick lubes, etc. Consumers now get their tires at big box stores or tire stores. “Back when gas stations did mechanical work, all stations had air compressors. I put in my charge card and still was not able to pump air.Ī: I turn to one of my heavy hitters - Tom-the-Rotten-Robbie-Gas-Man - who says: The sign on that pump said pay $1.50 by charge card. This has also happened several times in the past in several parts of the Bay Area. I went to two gas stations in the Powell Street area of Emeryville. I'm kind of discouraged because I truly would have bought a Suzuki for 6k if I thought I was going to turn around and sink a lot of money back into a bike.Q: Recently, I needed to put air in my tires. What are the options for spring conversions? Is it drop in cartridges? One-off work? Typical pricing? I have truly no clue so be detailed if you want. I was hoping to buy the right shock spring and go rip ): I'm kind of discouraged because I truly would have bought a Suzuki for 6k if I thought I was going to turn around and sink a lot of money back into a bike. I spoke with FC over lunch and they also recommended a 5.2. There's a fair amount of preload left too so I believe I can get it set. I'm going to re-do it all this week or weekend since the weather sucks. I was just breaking it in anyways, riding slow. When I realized that I was in my gear about to go ride it for the first time so I just loosened it up about one turn and ran it. So the sag was set from sitting on the stand from sitting on the ground with me on it. ![]() I set my sag and accidentally measured the 105mm/4.125" from full droop and not from static sag. What are some signs that I'm having hyper stiction like that? Aside from the obvious. I'll definitely be doing some inspecting then. The gasgas is supposedly better than the ktm in that regard. It is worse than a showa fork, but I can deal with it. If I liked how it handled everywhere else I might just live with it. Ultimately you are probably going to have to pay for a revalve if that is the problem. A flexx bar might be more what you are looking for. I have my doubts as to how much phds will help but I have never tried it. Resist the temptation to try super low pressures. You can also play with fork pressure a bit. Pro tune in Ohio had pretty reasonable fork revalve prices when I checked 18 months ago and he seemed to have a lot of experience with the different replacement cartridge options. They might say you need a revalve or maybe something else. I would also call some suspension guys and see what they recommend. It is probably worthwhile to call your suspension guy and see what rear spring he recommends. You might try reducing (or increasing?) the rear compression through the clickers just to see if it helps that specific issue. Going too soft on the rear might be just as bad as too stiff. I don’t know how sensitive the rear spring rate is to your issue. I never tried those back to back against the Evo bar but it only takes a little time to try them.
0 Comments
Leave a Reply. |